Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 27

Thread: Harddisk problem?

  1. #11
    Banned
    Join Date
    Oct 2002
    Posts
    36

    Seagate

    Hi vanman !

    I used to have the same problem and had to say goodbye to the drive.However before you do anything , you need to download, SeaTools Suite 2002 disc drive diagnostic software , from http://www.seagate.com/support/seatools/index.html.It will let you know exactly what's wrong, if thereis any ......

    Good luck man vanman....


    paladin

  2. #12
    Old ancient one vanman's Avatar
    Join Date
    Jul 2002
    Location
    Freestate,South Africa
    Posts
    570
    I know for a fact that my bios antivirus is disabled.Hope this could give you a better idea.
    I will try all the other things you guys suggested when i get home tonight.
    thanks again

    vanman
    Practise what you preach.

  3. #13
    Definetly bad RAM. "SUWIN -has detected an internal fault". That is a RAM error message. No need to ghost your hard drive.

  4. #14
    Senior Member
    Join Date
    May 2002
    Posts
    390
    look up your SUWIN error numbers here and it should tell you exactly what is wrong.
    just like water off a duck\'s back... I AM HERE.

    for CMOS help, check out my CMOS tut?

  5. #15
    Old ancient one vanman's Avatar
    Join Date
    Jul 2002
    Location
    Freestate,South Africa
    Posts
    570
    Hi guys,
    Well since I got home late last night, I decided to have a quick go at it. The SUWIN error only came up once. I clicked on ignore and from there it never stopped until the setup program was finished. Then I did a surface scan, which did pick up errors and fixed them. Then I ran a virus scan, which also didn’t come up with anything. By the way my antiviral option was disabled in the cmos. What I want to do now is to check the ram which are 4x 8mb Sims 72pin.Is there a way or a program which you guys can recommend to test the ram individually to try and rule out the defective one.

    The only other thing which happens now is that it brings up a blue screen every now and then saying:” your application caused an invalid page fault at address (can’t really remember it) something like 05ff…. etc. Sometimes vxd is also mentioned.
    So I left it at that until I have some more time to pinpoint this thing.

    Hope this can shed some light on the problem. Although I am beginning to suspect ram to be the culprit.

    Regards
    V/man
    Practise what you preach.

  6. #16

    check this

    check this for more information bout such problems

    http://members.lycos.co.uk/slacker55/index.htm

  7. #17
    Old ancient one vanman's Avatar
    Join Date
    Jul 2002
    Location
    Freestate,South Africa
    Posts
    570
    Thanks slacker_5, if only I could understand the language.
    Practise what you preach.

  8. #18
    i had the same problem, the harddisk , most surely, has bad sectors.
    You will have to block them with a software. That will, for sure, reduce on your disk space, but then the disk works superbly fine after that.

  9. #19
    Get yourself new RAM because the ones you have are old. Stop wasteing your time with the hard disk. It is not your hard drive. Either hook it up to a motherboard with fairly new components and install the OS there or simply get new RAM.

    As easy as that... Stop looking at boot problem documentation

    Sounds like an old motherboard also if you are using SIMM sticks. MAybe drop $80.00 on a new motherboard.

  10. #20
    Old ancient one vanman's Avatar
    Join Date
    Jul 2002
    Location
    Freestate,South Africa
    Posts
    570
    Hi guys,
    Well the good news is the problem was solved.It was the ram(tested with a ram tester).I took two of the simms out and the problem went away like it was never there.Nebuluswonderer and mark_ciel was the closest.

    Thanks again everybody I appreciate it.That's what makes this site so wonderfull,problem solved within 24hours.Do we have great people or what?

    regards
    vanman
    Practise what you preach.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •