Page 2 of 2 FirstFirst 12
Results 11 to 20 of 20

Thread: Router, Firewall Advice

  1. #11
    Senior Member
    Join Date
    Mar 2004
    Posts
    139

    VPN...


    Hi,
    here's another link you might want to take a look at. I chose this product
    for a class assignment, so I cannot give you a recommendation, but it seems to have
    versatility and features redundancy as well.

    http://www.linksys.com/products/prod...id=34&prid=589

    The router comes in at under $250.- a piece, if you shop around. It fits in well
    with xDSL. Best would be to use SDSL with a Service Level Agreement. Many
    ISP's provide this service these days. The plans are flexible and inexpensive.
    A 256K up/down service should put you in the $ 150.- monthly fee range,
    but you may not even need that much bandwidth. You can always upgrade the service.

    Some negative issues in comparison to traditional Frame Relay or ISDN may be that
    you'll have to deal with possible oversubscription of the service, scheduled maintenance outages,
    and last but not least, the exposure to the internet.
    This raises the issue of hidden costs associated with maintaining a security policy
    (ie. Updates, Wireless Access if installed, etc), AV software, tech support( configuration and maintenance).
    But a gateway to gateway VPN config should be relatively easy to set up.

  2. #12
    Senior Member
    Join Date
    Mar 2004
    Posts
    139

    VPN...


    Hi,
    here's another link you might want to take a look at. I chose this product
    for a class assignment, so I cannot give you a recommendation, but it seems to have
    versatility and features redundancy as well.

    http://www.linksys.com/products/prod...id=34&prid=589

    The router comes in at under $250.- a piece, if you shop around. It fits in well
    with xDSL. Best would be to use SDSL with a Service Level Agreement. Many
    ISP's provide this service these days. The plans are flexible and inexpensive.
    A 256K up/down service should put you in the $ 150.- monthly fee range,
    but you may not even need that much bandwidth. You can always upgrade the service.

    Some negative issues in comparison to traditional Frame Relay or ISDN may be that
    you'll have to deal with possible oversubscription of the service, scheduled maintenance outages,
    and last but not least, the exposure to the internet.
    This raises the issue of hidden costs associated with maintaining a security policy
    (ie. Updates, Wireless Access if installed, etc), AV software, tech support( configuration and maintenance).
    But a gateway to gateway VPN config should be relatively easy to set up.

  3. #13
    Junior Member
    Join Date
    Jan 2003
    Posts
    6
    Thanks Bluthund, I didn't even know that linksys made routers other than the 59.99 home user type that I am using now.

  4. #14
    Junior Member
    Join Date
    Jan 2003
    Posts
    6
    Thanks Bluthund, I didn't even know that linksys made routers other than the 59.99 home user type that I am using now.

  5. #15
    Senior Member
    Join Date
    Mar 2004
    Posts
    139

    VPN...


    You're welcome.
    I made a mistake regarding my statement about 'oversubscription'.
    It is usually Cable that has that problem. Anyway, I hope you come right
    with your network.

  6. #16
    Senior Member
    Join Date
    Mar 2004
    Posts
    139

    VPN...


    You're welcome.
    I made a mistake regarding my statement about 'oversubscription'.
    It is usually Cable that has that problem. Anyway, I hope you come right
    with your network.

  7. #17
    Junior Member
    Join Date
    Mar 2004
    Posts
    8
    Some good suggestions. My feeling is that if you're going to take the hardware firewall route, then get a hardware firewall, like Cisco's PIX. The low-end one will probably work very well once you get it tweaked for your network.

  8. #18
    Junior Member
    Join Date
    Mar 2004
    Posts
    8
    Some good suggestions. My feeling is that if you're going to take the hardware firewall route, then get a hardware firewall, like Cisco's PIX. The low-end one will probably work very well once you get it tweaked for your network.

  9. #19
    Junior Member
    Join Date
    Jan 2003
    Posts
    6
    Yeah, the hardware firewall option is looking the best for me. I think it would have the less latency of all and if it ever fails, I can put an ACL on the router until I could replace the firewall unit. Again and again, Thanks to all for some of the best ideas.

  10. #20
    Junior Member
    Join Date
    Jan 2003
    Posts
    6
    Yeah, the hardware firewall option is looking the best for me. I think it would have the less latency of all and if it ever fails, I can put an ACL on the router until I could replace the firewall unit. Again and again, Thanks to all for some of the best ideas.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •