PDA

Click to See Complete Forum and Search --> : netBT Problem


mikester2
January 21st, 2004, 02:53 AM
When i try to run the program nbtstat from the dos command line in windows xp i get the following message ... "Failed to access NetBT driver -- NetBT may not be loaded" ... I've gone into the registry and set it to run automatically, and restarted, but it just stays the same.

Any help would be great.
Thanks in advance.

phishphreek
January 21st, 2004, 03:15 AM
You may not have rights to it? At school, we can't run it under limited accounts. Whether they have disabled it or not... I'm not sure. I'm assuming that you've done some searching a bit?

http://www.techspot.com/vb/showthread.php?threadid=9007

Or, m$'s knowledgebase

err... what OS are you using?

You didn't mention what else you've tried... so there are a couple of things to try out.

mikester2
January 21st, 2004, 03:28 AM
Home PC running Windows XP (admin)
Tried setting the registry to auto start netBT ... that is all so far
Any ideas ?

Wazz
January 21st, 2004, 10:05 AM
Go to start and run. Type services.msc. Make sure the TCP/IP NetBIOS helper service is enabled and started. Hope this helps.

mikester2
January 21st, 2004, 07:21 PM
Thanks .... tried that, but it was already on ... still no luck ... anymore ideas ?

MrLinus
January 21st, 2004, 07:24 PM
Have you disabled any services?

mikester2
January 21st, 2004, 08:02 PM
that services that i have disabled are : -


Background Intelligent Transfer Service
ClipBook
Human Interface Device Access
Indexing Service
Messenger
NetMeeting Remote Desktop Sharing
PC-clillin Personal Firewall
Protected Storage
Remote Desktop Help Session Manager
Remote Registry
Routing and Remove Access
SSDP Discovery Servce
Telnet
Universal Plub and Play Device Host

MrLinus
January 21st, 2004, 08:03 PM
Going to sound weird but try to enable Messenger and see if it works then.

mikester2
January 21st, 2004, 08:16 PM
Tried that ... no luck :(

MrLinus
January 21st, 2004, 08:18 PM
I think I might have a Bingo (http://support.microsoft.com/default.aspx?scid=http://support.microsoft.com:80/support/kb/articles/Q272/9/91.ASP&NoWebContent=1) from Microsoft Knowledge Base..

mikester2
January 21st, 2004, 08:36 PM
I'm running winXP Pro, but i tried it anyway :( no luck . ... sorry to keep bugging you about this.
Ooooo i forgot it used to work before i followed this guide http://www.antionline.com/showthread.php?s=&threadid=237662
I'd really like anymore ideas you have ?

MrLinus
January 21st, 2004, 08:45 PM
Hrmm... The best way to disable DCOM is in the registry. Click Start -> Run and type 'regedit'. Select HKEY_LOCAL_MACHINE -> Software -> Microsoft -> OLE. Change the key EnableDCOM from having a value of Y to having a value of N. Reboot your maching and issue the 'netstat -an' command again. TCP port 135 should not show up.

Perhaps reverse this? You may have to reverse all the security measures and then apply one-by-one to see where it stops. My understanding of NetBT is that to disable it you need to stop the server and messenger services. I suspect that one or both are not actively running and that might be why you are running into issues. If you have disabled the DCOM that might also be interferring with it.

mikester2
January 21st, 2004, 09:04 PM
Thanks for the advice, i'm just going to work through undoing all those things now .. i'll let you know if i find anything for later reference for anyone with the same problem

Wazz
January 21st, 2004, 11:37 PM
Hmmm the only service I have enabled that you don't is Protected Storage which doesn't matter. I do have AFD Networking Support Environment listed as a dependency to the TCP/IP NetBIOS Helper but as far as I know, that is for QOS operations. Let us know if you figure it out.

mikester2
January 25th, 2004, 02:47 AM
Nope ... i'm sorry to say that even after spending the whole evening trying to get nbtstat working again i didn't find out how too ... in the end i resorted to a system restore to take me back to an earlier time when it was working.

I hope that anyone else with the same problem has more luck.

arnoldpoindextr
February 10th, 2006, 03:50 AM
I am having the same problem and have spent 4 hours on this already. I was disappointed that mikester2 did not get it resolved and resorted to a system restore. Everything that mikester2 I have tried and it still is not working.

I did follow a guide to securing XP like mikester2. After going threw his link on this forum I realized that the culporate might be the following.

Click on HKEY_LOCAL_MACHINE -> System -> CurrentControlSet -> Services -> NetBT -> Parameters. In the right pane you should see a key called 'TransportBindName' and it should contain the value '\Device'. Right click on this key and select Modify. Delete that value and then click OK. When you restart your computer Active Directory will be disabled.

#####
UPDATE

I change the key back to \Device rebooted and it did not work. I still think that it has something to do with this issue. We both change this key and had the same problem. It seems be related to the Active Directory.

Any other ideas?

nihil
February 10th, 2006, 01:00 PM
I am not sure if this is just a typo in your post, but the value should be:

\Device\

rather than \Device

Incidentally, I am aware that this is an old thread, but it is an old thread regarding a problem that was never resolved which makes it legitimate for reopening IMO.

:)

arnoldpoindextr
February 10th, 2006, 09:47 PM
Originally posted here (http://www.AntiOnline.com/showthread.php?threadid=253706#post886955) by nihil
I am not sure if this is just a typo in your post, but the value should be:

\Device\

rather than \Device

Incidentally, I am aware that this is an old thread, but it is an old thread regarding a problem that was never resolved which makes it legitimate for reopening IMO.

:)

Thank you nihil! It works now and this issue has been resolved. I did not have it listed as \Device\. Made the change and it is working fine.

I opened the thread because I had the exact same situation and it had not been resolved. Now the next person will have something else to check that has a proven resolution. Mikester2 was on the right track and pointed me in the right direction.

Thanks again.

nihil
February 10th, 2006, 11:57 PM
Thankyou arnoldpoindextr

It is good form to complete resolved problems by reporting back.

As a general comment, if the date is flashing, it means that the post is old and past its "sell by date" (this one was just over two years old). However, in this instance, you found an identical instance where the problem had not been resolved, and did the right thing by re-opening it so I could read the whole thread straight through.

Ack phtt! we got there in the end didn't we? :D

Cheers

kbsai
November 5th, 2009, 03:06 PM
netbt got resolved thank a loooottttt wasted 2 weeks...

t34b4g5
November 5th, 2009, 03:15 PM
netbt got resolved thank a loooottttt wasted 2 weeks...

Details are overwhelming :confused:

and welcome to AntiOnline. :)

maybe start a thread in Roll Call (http://antionline.com/forumdisplay.php?f=18) and maybe i don't know introduce yourself. ;)