My iptables is under /etc/sysconfig, is this correct? This is somethign that I am lacking skillwise, but I am getting another box from a friend, and I am going to set up iptables on it all by itself.

And, I do not see anything in the script that references the traceroute ports.

Here is the script:

Code:
 

# Firewall configuration written by lokkit
# Manual customization of this file is not recommended.
# Note: ifup-post will punch the current nameservers through the
#       firewall; such entries will *not* be listed here.
*filter
:INPUT ACCEPT [0:0]
:FORWARD ACCEPT [0:0]
:OUTPUT ACCEPT [0:0]
:RH-Lokkit-0-50-INPUT - [0:0]
-A INPUT -j RH-Lokkit-0-50-INPUT
-A RH-Lokkit-0-50-INPUT -p tcp -m tcp --dport 25 --syn -j ACCEPT
-A RH-Lokkit-0-50-INPUT -p tcp -m tcp --dport 80 --syn -j ACCEPT
-A RH-Lokkit-0-50-INPUT -p tcp -m tcp --dport 22 --syn -j ACCEPT
-A RH-Lokkit-0-50-INPUT -p udp -m udp -s 0/0 --sport 67:68 -d 0/0 
--dport 67:68 -i eth0 -j ACCEPT
-A RH-Lokkit-0-50-INPUT -p udp -m udp -s 0/0 --sport 67:68 -d 0/0 
--dport 67:68 -i eth1 -j ACCEPT
-A RH-Lokkit-0-50-INPUT -i lo -j ACCEPT
-A RH-Lokkit-0-50-INPUT -i eth0 -j ACCEPT
-A RH-Lokkit-0-50-INPUT -p tcp -m tcp --dport 0:1023 --syn -j REJECT
-A RH-Lokkit-0-50-INPUT -p tcp -m tcp --dport 2049 --syn -j REJECT
-A RH-Lokkit-0-50-INPUT -p udp -m udp --dport 0:1023 -j REJECT
-A RH-Lokkit-0-50-INPUT -p udp -m udp --dport 2049 -j REJECT
-A RH-Lokkit-0-50-INPUT -p tcp -m tcp --dport 6000:6009 --syn -j 
REJECT
-A RH-Lokkit-0-50-INPUT -p tcp -m tcp --dport 7100 --syn -j REJECT
COMMIT
# Generated by webmin
*mangle
:FORWARD ACCEPT [0:0]
:INPUT ACCEPT [0:0]
:OUTPUT ACCEPT [0:0]
:PREROUTING ACCEPT [0:0]
:POSTROUTING ACCEPT [0:0]
COMMIT
# Completed
# Generated by webmin
*nat
:OUTPUT ACCEPT [0:0]
:PREROUTING ACCEPT [0:0]
:POSTROUTING ACCEPT [0:0]
COMMIT
# Completed