It sounds like you might not have the DI-614+ cabled up correctly. The jacks on the router are labled "1, 2, 3, 4, WAN". The "WAN" cable should go to the DSL modem. Plug in the power chord and let your router get an IP address. When the lights on the front get stable, then plug your computer network cable into port "1". This should allow you to get to http://192.168.0.1 . Log in with the default id/password (admin, admin? you should change this). Poke around on the menus and you should see what you need. I think that there is a "Wizard" to walk you through a DSL config. This is also where you would update the router bios. (This advice is from my memory, which is fading with age so let me know if you are still having trouble and I will fire up my router and confirm). Once you get it running you should set up WEP encryption so your neighbors can't connect to your router with a simple click of the mouse.